-
DIY ornamental bed with automatic Rain Bird drip tube irrigation
For automatic watering, I again used the drip tube from Rain Bird. In combination with a valve box, solenoid valves from Hunter and automatic control by my irrigation computer, our ornamental bed is now thriving more beautifully than ever before. In this post, I’ll show you how I prepared the area. I show how I installed the automatic irrigation system with all its components. Accompanied by lots of tips and hints, I’ll show you the result of my work.
-
Lawn care in spring for the perfect lawn
It’s the beginning of March and winter is slowly retreating. It’s time for me to take care of my garden and bring it out of hibernation. Today I want to take care of my lawn. There is a lot to do, especially in spring. Mowing the lawn, fertilizing the lawn, reseeding the lawn, in addition to scarifying and aerating, are just a few things that I would like to tackle today. I also have to reactivate my water taps and my lawn irrigation system after the winter.
-
Lawn Irrigation – Connect 4 Rain Bird Valves to Hunter X-Core Computer
I am still in the process of converting my existing Hunter lawn irrigation system. From the current 3 sprinkler circuits with 4 sprinklers each, I will build 6 circuits. I will then install 3 sprinklers per circle. For the blasters, I have so far relied on models from Hunter. My 1st valve box is also a Hunter product. Now the 2nd box is to be installed. Here, however, I rely on solenoid valves from Rain Bird. Rain Bird, like Hunter, is one of the top dogs in the irrigation equipment market. Price-wise, the valve box was even a little more interesting than Hunter’s box.
-
Hunter X-Core control computer for garden irrigation program yourself
In one of my last blog posts, I described the installation and connection of the Hunter X-Core irrigation computer. I have explained how to connect the solenoid valves to the irrigation computer. However, I only briefly touched on the programming of the Hunter X-Core. In this article I will write in detail how I programmed my Hunter X-Core irrigation computer.
-
Perfect winterizing of lawn and irrigation system
It’s fall and the cold winter is approaching. It is therefore high time to prepare the lawn and the lawn irrigation system for the cold and frosty temperatures by winterizing. My main focus today is on making my garden ready for winter, which includes taking care of the lawn and making sure the automatic lawn watering system is frost-proof.
-
Lawn Irrigation Comparison Hunter MP Rotator vs. RainBird R-Van
My lawn irrigation system has been extensively rebuilt in recent years in preparation for expansion. The small lawn in front of the office on the east side should be incorporated into the existing lawn irrigation system in a timely manner. I had already calculated the position of the sprinklers. The area is relatively small, about 10 x 10 meters. Irrigation with the previously installed Hunter i20 sprinklers did not seem very effective to me. I have therefore dealt with more in-depth with the so-called rotator bursts.
