-
Build your own carport – embedding post anchors in concrete
Within a few weeks, we had prepared the excavation pit for our future double carport. The retaining wall on the slope was also built with formwork stones and has already been backfilled. The earth now had to subside and the frost from the winter months had to disappear first. I have described the details for preparing the ground for the new carport in the article Building a carport yourself – preparing the building site, and you can find my entry on building the slope stabilization with formwork stones in the article Building a carport yourself – securing the slope with formwork stones. In the meantime, we were able to take…
-
Build your own carport – secure slope with shuttering blocks
To effectively secure the slope behind my carport, I decided to build a retaining wall made of formwork stones. This measure was not only intended to bring visual improvements, but also to ensure the stability of the slope. In this context, the construction of a solid strip foundation was essential in order to guarantee permanent slope stabilization. In this article I describe how I built the concrete foundation and I describe how I built my steel-reinforced wall from concrete formwork blocks in order to be able to use our new carport safely, despite the slope.
-
Build carport yourself – prepare building site
A carport on our property should have long given the vehicles the necessary protection. In principle, there were two possible building sites on the property where the construction of a double carport was feasible. Directly at the entrance, however, the practical implementation would be difficult. Due to the slope to the south and the incline of the driveway, the effort required to level this area would simply have been too great.
-
Slope stabilization – stack gabions safely on top of each other
Over a period of a few weeks, I built the first row of gabions over a length of around 30 meters. A relatively straight section was followed by a slight bend. By placing the gabions inside each other, I was able to form a corner on the south-east side. Towards the end, the difference in height to the existing gabion wall was ensured via a terraced structure of the subsoil. As this was not enough to safely support the entire slope behind the wall, I had to stack the stone baskets in a second row. In this article I describe the construction of my 2 meter high and more than…
-
Securing slopes with gabions – installing stones correctly
I had now erected the first row of gabions on my earth slope over a length of a good 30 meters. I drew a nice curve for the next 20 meters and then built a real corner with a height offset for the remaining meters. Before I could install the second row of stone baskets, the bottom row first had to be filled with stones.
-
Securing slopes with gabions – building corners and curves
The stone baskets for the gabion wall were erected over a length of a good 20 meters within a few weeks. Starting from the driveway in a south-easterly direction, I was able to build a slight curve. The spirals provide a certain amount of play – but this does not allow for tight curves. So now I had to form proper corners with
