Stories from the construction
Everything else that happens on the construction site
-
EasyCarport kit – delivery and accessories
Once the base and post anchors were in place, we just had to wait for the kit to be delivered. I put together and ordered the carport from the company “Easy Carport” online. I have already described how to prepare the building site for the carport and how to set the H-post anchors in concrete in the article Building a carport yourself – setting post anchors in concrete. When we placed the order, we had set a preferred date three months in the future. As the construction plans and post anchors were sent to us immediately, we had plenty of time to prepare. In this article, I describe how the…
-
Lawn Irrigation Comparison Hunter MP Rotator vs. RainBird R-Van
My lawn irrigation system has been extensively rebuilt in recent years in preparation for expansion. The small lawn in front of the office on the east side should be incorporated into the existing lawn irrigation system in a timely manner. I had already calculated the position of the sprinklers. The area is relatively small, about 10 x 10 meters. Irrigation with the previously installed Hunter i20 sprinklers did not seem very effective to me. I have therefore dealt with more in-depth with the so-called rotator bursts.
-
Build your own carport – embedding post anchors in concrete
Within a few weeks, we had prepared the excavation pit for our future double carport. The retaining wall on the slope was also built with formwork stones and has already been backfilled. The earth now had to subside and the frost from the winter months had to disappear first. I have described the details for preparing the ground for the new carport in the article Building a carport yourself – preparing the building site, and you can find my entry on building the slope stabilization with formwork stones in the article Building a carport yourself – securing the slope with formwork stones. In the meantime, we were able to take…
-
Build your own carport – secure slope with shuttering blocks
To effectively secure the slope behind my carport, I decided to build a retaining wall made of formwork stones. This measure was not only intended to bring visual improvements, but also to ensure the stability of the slope. In this context, the construction of a solid strip foundation was essential in order to guarantee permanent slope stabilization. In this article I describe how I built the concrete foundation and I describe how I built my steel-reinforced wall from concrete formwork blocks in order to be able to use our new carport safely, despite the slope.
-
Build carport yourself – prepare building site
A carport on our property should have long given the vehicles the necessary protection. In principle, there were two possible building sites on the property where the construction of a double carport was feasible. Directly at the entrance, however, the practical implementation would be difficult. Due to the slope to the south and the incline of the driveway, the effort required to level this area would simply have been too great.
-
Slope stabilization – stack gabions safely on top of each other
Over a period of a few weeks, I built the first row of gabions over a length of around 30 meters. A relatively straight section was followed by a slight bend. By placing the gabions inside each other, I was able to form a corner on the south-east side. Towards the end, the difference in height to the existing gabion wall was ensured via a terraced structure of the subsoil. As this was not enough to safely support the entire slope behind the wall, I had to stack the stone baskets in a second row. In this article I describe the construction of my 2 meter high and more than…
