Stories from the construction
Everything else that happens on the construction site
-
Converting a pool – dismantling an old steel wall pool
Our steel wall pool is already a few years old. The oval pool has a size of 6.23 x 3.60 x 1.5 meters. The almost 30 m³ of water is heated to a pleasant 30°C automatically and weather-controlled via a solar system. The pool was built on a solid concrete base plate. On the sides, 2 walls of concrete formwork support the sides of the pool. I had shuttered the curves and also filled them with concrete. This pool is now being dismantled. I am building a new pool from concrete formwork blocks at this point. In this article, I write about the removal of the old steel wall. I…
-
Dry out the cellar yourself – infrared heating is used
In order to make the basement rooms of our over 100-year-old city villa usable, I first have to dry them out. The house is partially built into the slope. On the east side the basement floor is at ground level and on the west side about 200 cm below ground level. I have already used various methods for draining. I am currently creating a new watertight horizontal barrier in the masonry using chemical agents such as injection liquid, injection sticks and injection cream. I have already drained the eastern part of the cellar. Now it is the turn of the western part of the building. This time I let my…
-
Lawn Irrigation – Connect 4 Rain Bird Valves to Hunter X-Core Computer
I am still in the process of converting my existing Hunter lawn irrigation system. From the current 3 sprinkler circuits with 4 sprinklers each, I will build 6 circuits. I will then install 3 sprinklers per circle. For the blasters, I have so far relied on models from Hunter. My 1st valve box is also a Hunter product. Now the 2nd box is to be installed. Here, however, I rely on solenoid valves from Rain Bird. Rain Bird, like Hunter, is one of the top dogs in the irrigation equipment market. Price-wise, the valve box was even a little more interesting than Hunter’s box.
-
Program Hunter X-Core control computer for garden irrigation yourself
In one of my last blog posts, I described the installation and connection of the Hunter X-Core irrigation computer. I have explained how to connect the solenoid valves to the irrigation computer. However, I only briefly touched on the programming of the Hunter X-Core. In this article I will write in detail how I programmed my Hunter X-Core irrigation computer.
-
New submersible pump defective – draining the cellar
Two months ago I built a sump pit with a sump pump in my cellar to collect the water seeping into it and further dry out my cellar. A submersible pump with an integrated float switch should then pump the water out via a hose. Unfortunately, things turned out quite differently. The new submersible pump in the pump sump was defective after just a few weeks. Read this article to find out why the pump was destroyed and how the draining process continued.
-
Drying basement – pump sump | build septic tank yourself
I built a sump pump at the lowest point of my house to help drain my cellar in the long term. The water is collected there and pumped out automatically. In this article, I describe how I built the soakaway and what I had to pay particular attention to. I go into the advantages and disadvantages of this method of draining the cellar and of course also write about whether this method works. Drying out the basement of my 120 year old house has been going on for 12 months now. In the interior, I have previously used the injection method to dry out. The areas above the barrier layer…
