-
Renovating the garden terrace: switching from wood to WPC and aluminum profiles
The renovation of our garden terrace has been in the pipeline for some time. The larch wood of the substructure could no longer withstand the loads and slowly disintegrated. So after ten years under the open sky, it was time to give our terrace a fresh update with WPC boards. In this article, we take you on a journey of renewal – from the initial idea to the finished result.
-
Laying, gluing and welding pool liners correctly
In this article, I describe how the new pool liner was laid, glued and welded to the walls and floor of our new pool. The pool steps and the sunbathing area in the water were lined with a special pool liner that makes the surface non-slip. The new pool in the garden was built with concrete formwork blocks and replaces our old steel wall pool. Before I can lay the liner in the concrete pool, some preparations are necessary. In this article I will show you every step.
-
DIY ornamental bed with automatic Rain Bird drip tube irrigation
For automatic watering, I again used the drip tube from Rain Bird. In combination with a valve box, solenoid valves from Hunter and automatic control by my irrigation computer, our ornamental bed is now thriving more beautifully than ever before. In this post, I’ll show you how I prepared the area. I show how I installed the automatic irrigation system with all its components. Accompanied by lots of tips and hints, I’ll show you the result of my work.
-
Dewinterizing the pool – putting pool technology into operation and adjusting water values
In spring, dewinterizing my pool is at the top of my to-do list. The winter safety devices must be dismantled and the pool technology must be installed. The water values are checked and readjusted. The filter systems are also reactivated. So nothing stands in the way of a great swimming season. In this article, you’ll find out which steps are important and how I prepared my pool optimally for sunny bathing days.
-
Drainage – retrofitting a horizontal barrier yourself
In addition to draining the outside of my villa, which was built in 1900, some of the basement walls also need to be sealed from the inside. The horizontal barrier in the 36 to 80 centimeter thick walls is no longer in tact. This time I dared to install a retrofit horizon blocker and used the NovuSticks for this. Here I describe my approach and my experiences.
-
Robot lawn mower – Find and repair a broken control cable easily
If the robotic lawn mower no longer wants to drive, it is often due to a defective or broken control cable. But how do you find the broken spot on the boundary wire? And how can you repair the damage quickly and easily yourself? I have made a video on precisely these questions and will now provide many more important tips and tricks with this entry.
