-
Draining the cellar – 1 year later
I have been working on draining the cellar for a good 2 years. In addition to repairs to the pipe system, ventilation concepts, dehumidifiers, dryers and a pump shaft in the cellar, I also installed a subsequent horizontal barrier with a masonry injection. It is now time for a review and a summary of the individual measures.
-
Dry out the cellar yourself – infrared heating is used
In order to make the basement rooms of our over 100-year-old city villa usable, I first have to dry them out. The house is partially built into the slope. On the east side the basement floor is at ground level and on the west side about 200 cm below ground level. I have already used various methods for draining. I am currently creating a new watertight horizontal barrier in the masonry using chemical agents such as injection liquid, injection sticks and injection cream. I have already drained the eastern part of the cellar. Now it is the turn of the western part of the building. This time I let my…
-
New submersible pump defective – draining the cellar
Two months ago I built a sump pit with a sump pump in my cellar to collect the water seeping into it and further dry out my cellar. A submersible pump with an integrated float switch should then pump the water out via a hose. Unfortunately, things turned out quite differently. The new submersible pump in the pump sump was defective after just a few weeks. Read this article to find out why the pump was destroyed and how the draining process continued.
-
Drying basement – pump sump | build septic tank yourself
I built a sump pump at the lowest point of my house to help drain my cellar in the long term. The water is collected there and pumped out automatically. In this article, I describe how I built the soakaway and what I had to pay particular attention to. I go into the advantages and disadvantages of this method of draining the cellar and of course also write about whether this method works. Drying out the basement of my 120 year old house has been going on for 12 months now. In the interior, I have previously used the injection method to dry out. The areas above the barrier layer…
