Restoration and working techniques
Restoration of doors/stucco/metal elements and various work techniques
-
DIY ornamental bed with automatic Rain Bird drip tube irrigation
For automatic watering, I again used the drip tube from Rain Bird. In combination with a valve box, solenoid valves from Hunter and automatic control by my irrigation computer, our ornamental bed is now thriving more beautifully than ever before. In this post, I’ll show you how I prepared the area. I show how I installed the automatic irrigation system with all its components. Accompanied by lots of tips and hints, I’ll show you the result of my work.
-
Dewinterizing the pool – putting pool technology into operation and adjusting water values
In spring, dewinterizing my pool is at the top of my to-do list. The winter safety devices must be dismantled and the pool technology must be installed. The water values are checked and readjusted. The filter systems are also reactivated. So nothing stands in the way of a great swimming season. In this article, you’ll find out which steps are important and how I prepared my pool optimally for sunny bathing days.
-
Drainage – retrofitting a horizontal barrier yourself
In addition to draining the outside of my villa, which was built in 1900, some of the basement walls also need to be sealed from the inside. The horizontal barrier in the 36 to 80 centimeter thick walls is no longer in tact. This time I dared to install a retrofit horizon blocker and used the NovuSticks for this. Here I describe my approach and my experiences.
-
Robot lawn mower – Find and repair a broken control cable easily
If the robotic lawn mower no longer wants to drive, it is often due to a defective or broken control cable. But how do you find the broken spot on the boundary wire? And how can you repair the damage quickly and easily yourself? I have made a video on precisely these questions and will now provide many more important tips and tricks with this entry.
-
2. set up balcony power station in the garden and connect in series.
Despite my balcony power station in the backyard and lower electricity consumption, electricity costs keep going up. According to the http://strom-report.de, KWh of electricity costs an average of 34.6 cents. New contracts currently cost as much as 41 cents. It is therefore necessary to think about cost-effective alternatives and to add another module to my existing Balkan power plant. But can I connect 2 different PV modules together at all? Do I need a new inverter for two modules or can I continue to use the two old micro inverters?
-
Draining the cellar – 1 year later
I have been working on drying out my basement for a good 2 years. In addition to repairs to the pipe system, ventilation concepts, dehumidifiers, dryers and a pump shaft in the cellar, I also installed a subsequent horizontal barrier with a masonry injection. It is now time for a review and a summary of the individual measures.
