The garden
Everything that happens in and around our garden
-
Build your own garden kitchen – Solid half-timbered roof with OSB and welded sheeting
When building my garden kitchen, the next priority was to construct a robust wooden roof. The roof was to consist of solid wooden beams which I wanted to screw directly onto the walls made of glued aerated concrete blocks. The covering should be made with sheet piling and OSB boards. My plan also included fitting the guttering, the end plates and gluing the welding membrane to make the roof weatherproof. In this entry I will show you step by step how I carried out the individual installations and what I had to pay particular attention to. Of course, there are also some tips that you are welcome to adopt.
-
Build your own garden kitchen – plan and install the electrics
When building my garden kitchen, the electrics were one of the biggest challenges. In addition to the right cables for the power supply and the perfect positioning of the sockets, proper fuse protection was of course also necessary. It should also be possible to use a TV and a sound system in the garden kitchen at a later date. So I also had to plan for network and audio cables and install them in the garden kitchen.
-
Renovating the garden terrace: switching from wood to WPC and aluminum profiles
The renovation of our garden terrace has been in the pipeline for some time. The larch wood of the substructure could no longer withstand the loads and slowly disintegrated. So after ten years under the open sky, it was time to give our terrace a fresh update with WPC boards. In this article, we take you on a journey of renewal – from the initial idea to the finished result.
-
Laying, gluing and welding pool liners correctly
In this article, I describe how the new pool liner was laid, glued and welded to the walls and floor of our new pool. The pool steps and the sunbathing area in the water were lined with a special pool liner that makes the surface non-slip. The new pool in the garden was built with concrete formwork blocks and replaces our old steel wall pool. Before I can lay the liner in the concrete pool, some preparations are necessary. In this article I will show you every step.
-
DIY ornamental bed with automatic Rain Bird drip tube irrigation
For automatic watering, I again used the drip tube from Rain Bird. In combination with a valve box, solenoid valves from Hunter and automatic control by my irrigation computer, our ornamental bed is now thriving more beautifully than ever before. In this post, I’ll show you how I prepared the area. I show how I installed the automatic irrigation system with all its components. Accompanied by lots of tips and hints, I’ll show you the result of my work.
-
Robot lawn mower – Find and repair a broken control cable easily
If the robotic lawn mower no longer wants to drive, it is often due to a defective or broken control cable. But how do you find the broken spot on the boundary wire? And how can you repair the damage quickly and easily yourself? I have made a video on precisely these questions and will now provide many more important tips and tricks with this entry.
