800W balcony power plant easy to install & optimize by yourself
To cover the base load I have installed a small 300W balcony power plant for quite some time. I was able to gain some experience and optimize my own use of solar power. Now I am replacing my 300W balcony power plant with a new 800W balcony power plant.
In addition to the new PV modules, I renew the substructure, the microinverter and, of course, the connection to the house grid.
During my rebuild, a few questions came up, which I would like to answer with this entry and my video:
👉 What components does a balcony power plant consist of?
👉 How to fix a balcony power station?
👉 Where do I point it to have the optimal yield?
👉 What do I have to pay attention to when connecting to the mains?
What is a balcony power plant and how does a balcony power plant work?
A balcony power plant is a photovoltaic system that converts the direct current of the photocells into 220V alternating current through an inverter. The electricity is fed into the domestic grid where it is directly consumed.
If the electricity yield is higher than the current consumption in the household, the surplus is fed into the public power grid free of charge. If the consumption in the household is higher than the current yield, only the additional consumption is drawn from the public power grid at a charge.
Thus, a balcony power plant serves primarily to cover the basic consumption of electricity in the household. However, the complete, self-sufficient supply of the household or even the charging of an electric car are not practically possible.
Unlike the large PV systems, a balcony power plant usually consists of only 1 or 2 PV modules, each with its own microinverter.
The installation and connection of a balcony power plant is quick and easy. The module is propped up and the Schuko plug is plugged into the socket – done!
Even the extension with another module is no problem. How this works, I have described here: Balcony power plant – build 2nd module and connect it with first module.
- % - Mit unserem neuestem 800W Wechselrichter steigern Sie ab sofort den Ertrag Ihrer PV Module um 33%. Profitieren Sie noch heute mit Ihrem Balkonkraftwerk!
- - Durch die bifazialen Solarmodule knnen Sie bis zu 30% mehr Energie erzeugen, bei gleicher Wattzahl. Die Technologie ermglicht es, Sonnenlicht auf beiden Seiten der Module (Glas-Glas) zu nutzen.
- - Das 1000W Balkonkraftwerk besteht nur aus hochwertigen Bauteilen. 2x Bifaziale 500W Jolywood HD120N Solarmodule, 1x Growatt 800W Wechselrichter, 2x 1,0m Verlngerungskabel, 1x 5m Kabel zur Steckdose & 1x Wechselrichterhalterung.
- - Mit der Telefon-App berwachen Sie Wechselrichter-Daten per WLAN-Funktion in Echtzeit. Sie sind direkt informiert ber tgliche & jhrliche Solarertrge & CO-Einsparungen! Dank einfacher Einrichtung und intuitiver Bedienung direkt startklar!
- - Die Bauteile der Stecker Solaranlage versprechen eine lineare Leistung bis zu 30 Jahre nach dem Kauf. Somit sind die Ertrge Ihres Balkonkraftwerks gesichert und bereit fr die Zukunft.
Optimal orientation and use of a balcony power plant
Since photovoltaic modules produce electricity from sunlight, it naturally makes sense to orient the modules towards the sun. In the northern hemisphere, this should be towards the south.
The most sunlight is captured when facing south. Of course, the obstacles on site, such as trees or houses, must be taken into account. Any shade reduces the power yield, sometimes significantly.
Since the electricity from a balcony power plant is consumed directly, apart from the available storage options, a direct southern orientation is not the best solution for every household.
When oriented to the south, the electricity yield is highest around noon – The chart of the electricity produced forms a Gaussian bell during the day.
However, depending on the situation in the household, the consumption is not congruent with the yield. In a household where the members are away from home during the day (work, school), the high consumptions are rather in the morning and evening hours.
During the day, on the other hand, the power consumption should only consist of the basic consumption, which is mostly refrigerator, heating and standby devices.
There are now three optimization options for these households:
- The electricity-intensive consumers are used/programmed to run during midday hours. This should be no problem with the dishwasher or pool pump.
- The orientation of the modules is changed so that the potential yield is better distributed throughout the day. It makes sense to align one module to the southeast and one module to the southwest. In this way, consumption at peak times is better covered while the previously unused surplus electricity fed into the grid free of charge at midday is reduced.
- The PV modules are installed on a solar tracker. A solar tracker is a mount for PV modules which follows the sun both horizontally and vertically throughout the day. The PV modules are therefore always optimally aligned to the sun.
- ✅[Mehr Strom erzeugen] Zweiachsige Solartracker sorgen dafür, dass sich die montierten Paneele tagsüber dem Sonnenlicht aussetzen. Im Vergleich zu fest installierten Solarmodulen kann die PV-Stromerzeugung mit dem Tracker um mindestens 40 % gesteigert werden.
- ✅[270°-Drehung] Mit 2-Achsen-Antrieb und empfindlichem Sonnenscheinsensor kann sich der Solartracker um 270 ° drehen und die Paneele so gestalten, dass sie die Sonneneinstrahlung von der Nord-, Süd-, West- und Ostseite absorbieren.
- ✅[Beständig im Wind] Es gibt einen Luftgeschwindigkeitssensor für windige Tage, wenn er starken Wind erkennt (Daten können manuell eingestellt werden), setzt der Solartracker den Winkel zum Horizont automatisch zurück, um stabil zu bleiben. Durch das Bohren der Spreizschrauben in den Boden kann der Sockel auch bei Hurrikan oder Sturm problemlos fest stehen.
- ✅[Für verschiedene Panels] Entworfener Platz für 6 Stück 170W ECO-WORTHY Paneele. Für verschiedene Paneele berechnen Sie bitte nach den angegebenen Längenangaben. Die Querstangenlänge: 114,2 Zoll (2900 mm) Breite: 29,4 Zoll (1000 mm) Vertikale Stangenlänge (jede Seite): 45,6 Zoll (1160 mm) Breite: 30,3 Zoll (770 mm). Mit 1500N Treibgestänge.
- ✅[Für Hof/Hof/Feld] Benötigen Sie nur 114,2 Zoll * 114,2 Zoll Bodenfläche, 3,93 Fuß Höhe. Es kann problemlos auf Hof, Bauernhof, Feld und Flachdach montiert werden.
What are the components of a balcony power plant?
The kit for a balcony power plant is quite manageable. The main component is of course the PV module which produces the direct current with its photocells.
The inverter, in balcony power plants much smaller micro inverters are regularly installed, converts the direct current into ~220V alternating current and synchronizes this with the applied current from the socket to ~50Hz.
For mounting and fastening, there is a wide variety of brackets, elevations or rail systems.
Suitable DC cables with matching MC4 connectors to connect the module to the inverter and a power cable (usually with a Betteri connector) to connect the inverter to the mains/power socket are also still required.
However, since most balcony power plants are sold in sets, you do not have to worry much about the right choice. In my experience, the sets are well equipped and the individual components are perfectly matched.
- 【Präzises Crimpwerkzeug Set】Für einfache und genaue Installation der Solar-Steckverbinder. Präzises Design und vollständige Verriegelung, die das Abisolieren von zweischichtigen isolierten Kabeln (2,5 / 4/6 mm²) und die Qualität der Crimpen zuverlässig gewährleisten.
- 【10 Paar Solarpanel Anschlüssen】10 Paar Solarpanel Kabelstecker (männlich & weiblich) dienen zum Verbinden des Solarpanel-PV-Kabels und haben einen verzinkten Kupferkern und ein PPO-Isolationsgehäuse, Wasserdichten Ring am Anschluss. Hohe Qualität, Abdichten von Wasser und Staub, um zu Korrosion.
- 【Zwei Solar Steckschlüssel】Die Schraubenschlüssel sind zum Lösen und Festziehen der Steckverbinder, die lassen Sie sich eine effiziente Arbeit, um Zeit und Arbeitskräfte für die Installation zu sparen.
- 【Ergonomisches Design】Der Crimper besteht aus PP + TPR-Material und ausgestattet mit einem ergonomischen Kunststoffgriff . Bei der Konstruktion einer arbeitssparenden Pleuelstange vom Ratschentyp arbeitet die Drahtcrimper außerdem effektiver, indem die Druckkraft des Steuerhebels für die Radscheibe eingestellt wird.
- 【Geeignet】Perfekt für Solar Crimpwerkzeuge/ Solar PV Werkzeugsätze. Leichtes und kompaktes Design. Gewährleisten einen perfekten Crimpeffekt.
How to fix a balcony power plant?
As the name suggests, a balcony power plant is small enough to be installed on a balcony.
But, of course, you can install your balcony power plant on the facade, on the roof of the house, flat garage roof, or simply on the ground. Even a mounting on the garden fence or on the carport are technically no problem – as long as the right bracket is used.
In my opinion, a simple, safe and proven support for a balcony power plant is an elevation with angled aluminum profiles. These elevations can be used for floor mounting and wall mounting.
The horizontal angle can be easily adjusted between 0° and 90° with these mounts.
- [Witterungsbeständig] Unsere witterungsbeständigen, aus AL6005-T5 Aluminium gefertigten verstellbaren PV-Anlagen-Halterungen sind ganz einfach an dem Solarmodul anzubringen, sodass Ihre Solaranlage im Nu einsatzbereit, ist
- [Alles Dabei] Schrauben und Muttern aus Edelstahl SUS304 befinden sich bereits im Lieferumfang. Unsere verstellbaren Halterungen eignen sich für Aufbauten auf flachen Untergründen wie z.B. Garagen, Gärten, Balkone... .
- [Einfache Montage] Bequeme Justierung des Neigungswinkels, um den maximalen Ertrag zu ernten.
- [Details] Maße lange Strebe (BxTxH): 28 x 42x 3 mm Länge lange Strebe: 1180 mm Länge Querstrebe: 525 mm Maße Querstrebe (BxTxH): 28 x 32x 3 mm Max. Solarmodul breite: 1180 mm Materialstärke: 3 mm
- [Lieferumfang] 8x lange Streben 4x kurze Streben 2x Schrauben-Set
Another good option for mounting the PV modules is a rail system. These support systems are usually also used for the large photovoltaic systems on the roof.
With this support system, two mounting rails are first fastened on top of each other. This can happen via special roof hooks or also via the above-mentioned elevations. The modules are then placed crosswise or upright on these rails and fixed with special retaining clamps.
The assembly is simple and easy. With a cordless screwdriver and the appropriate bit, the assembly is done in no time.
In any case, the assembly should be stable and storm-proof!
Zuletzt aktualisiert am 24. November 2024 um 03:45 . Ich weise darauf hin, dass sich hier angezeigte Preise inzwischen geändert haben können. Alle Angaben ohne Gewähr. (*) Bei den verwendeten Produktlinks handelt es sich um Affiliate Links. Ich bin nicht der Verkäufer des Produktes. Als Amazon-Partner verdiene ich an qualifizierten Verkäufen. Dein Preis ändert sich jedoch nicht.
Video: Install and optimize 800W balcony power plant yourself
I documented the setup, the installation, the electrical connection and also the setup of the WLAN connection as well as the apps for monitoring the power output in a video.
You can find more exciting videos on my YouTube channel or directly in the matching playlist.
- :- 2x 440W Bifazial Glas-Glas Frame PV Modul, 1x HMS-800W-2T Upgradefhiger WIFI Mikrowechselrichter, 1x HMS Feldstecker, 1x 3 Meter + Schukostecker
- :- Bifaziale Solarmodule bieten den Vorteil, bis zu 30% mehr Energie im Vergleich zu traditionellen Modulen mit derselben Leistung zu erzeugen. Dies wird durch die Nutzung von Sonnenlicht auf beiden Seiten der Module (Glas-Glas) erreicht.
- :- Unbeugsam gegen die Krfte der Natur, widersteht es starken Winden (2400 Pa) und schweren Schneelasten (5400 Pa). Seine bifazialen Zellen, eingefasst in Glas auf beiden Seiten, gewhrleisten Langlebigkeit und verbesserten Schutz whrend Strmen oder widrigen Wetterbedingungen. TV-zertifiziert und PID-resistent, garantiert dieses Solarmodul maximale Effizienz und bietet eine 25-jhrige Produktgarantie sowie eine unschlagbare 30-jhrige Leistungsgarantie (87,4% Leistungsgarantie).
- - HMS: HMS Wechselrichter sind bekannt fr ihre berlegene Qualitt und Zuverlssigkeit, die von billigen Alternativen unerreicht bleibt. Verbessern Sie Ihr Balkonkraftwerk Setup mit unserem HMS-800 Wechselrichter. Genieen Sie eine nahtlose Plug & Play-Installation und Wi-Fi-Konnektivitt fr Echtzeitberwachung ber S-Miles Cloud. Dieser HMS 800 Wechselrichter ist von 600W auf 800W aufrstbar, sodass Sie stets an der Spitze der Technologie stehen. Mit 12 Jahren Garantie und IP67-Schutz ist er die zuverlssige und effiziente Wahl.
- : Bei uns erhalten Sie garantierte Qualitt. Als vertrauenswrdiger Anbieter von Solurlsungen stehen wir fr Zuverlssigkeit und bieten Produkte, die fr nachhaltige und sorgenfreie Energie garantiert sind. Unsere engagierten Support-Teammitglieder stehen Ihnen zur Verfgung, um Ihre Fragen zu beantworten und Probleme im Zusammenhang mit Ihrem Kauf zu lsen.
- (*) : Die Watt-Zahl eines Solarpanels gibt die maximale Leistung an, die das Panel unter idealen Bedingungen generieren kann. Sie dient als Mastab fr die Energieproduktion des Panels und ermglicht es, die Leistungsfhigkeit verschiedener Panels zu vergleichen. Ein hherer Watt-Wert zeigt generell eine hhere Energieausbeute des Panels an.
Convert direct current to alternating current? What exactly does the inverter do?
The photovoltaic modules produce direct current through solar radiation. This can be charged directly into a suitable battery via a charge controller.
Especially when setting up a photovoltaic island system or for power supply for the motor home or camper, this is a very good solution.
How this works exactly I have described in detail in my YouTube video PV island system build yourself | Solar power for garden & caravan | With power grid backup.
However, first and foremost, a balcony power plant serves as a support in the home for most users. The self-generated electricity should cover the basic consumption, the basic noise, and thus reduce the electricity costs in the long term.
However, 12V or 24V direct current is not sufficient for this purpose. The European power grid is rated at ~220V at ~50Hz.
Why am I writing about ~220Vand ~50Hzhere? Unfortunately, the power grid is not quite so “clean” and “stable”. 230V voltage or frequencies of 49.xx are common to measure.
Since the balcony power plant synchronizes directly with its own power grid, however, this plays only a minor role in direct use. For better readability I will write 220V or 50Hz in the further course.
To get the direct current now to 220V alternating current, a voltage converter is needed. This work is done by the so-called inverter.
While the normal inverter is relatively large and can “process” a large number of modules, the so-called microinverter is regularly used in the balcony power plant.
This microinverter transforms the direct current of the PV modules to 220V alternating current. At the same time it synchronizes the frequency of the “new” alternating current with the frequency from the house current. The process of synchronization may take a few minutes.
Subsequently, however, the newly generated electricity is fed into the domestic grid at the appropriate voltage and frequency.
Modern microinverters often also have a connection for a 2nd PV module, an internal data logger and an integrated WLAN module. The inverter can therefore be integrated into almost any smart home.
Inverter rapid shutdown – What is it?
But the microinverters have a second function – fast shutdown.
The power contacts in an outlet or on an extension cord are well protected against accidental contact. The probability of getting an electric shock when inserting a power plug into an earthed socket is therefore very low.
It is different with the connection plug for the balcony power plant. The cable ends with the Schuko plug and the metal contacts exposed there. When the sun shines on the PV modules and the power plant produces electricity, these contacts are energized.
Electrocution would be quite likely.
However, to prevent this from happening, the microinverter immediately switches off the power as soon as the plug is removed from the socket and there is no longer any grid connection.
This happens very quickly and thus protects against dangerous electric shocks at the open metal contacts.
Even if the technology is established and basically works, the Deye case has shown that one should not blindly rely on these safeguards.
Deye had subsequently eliminated the relay that performs the shutdown on some already-approved inverter models. Automatic shutdown when the plug was pulled out therefore no longer took place.
-
Price: € 8.99instead of: € 19.49
-
-
-
Price: € 12.99instead of: € 13.99
-
-
-
-
-
Price: € 105.00instead of: € 127.00
-
-
-
-
Price: € 3.90instead of: € 4.66
-
-
-
Balcony power plant – Connecting inverters correctly – Betteri, Wieland & Co
The balcony power plant has been constructed and mounted in the correct location with the appropriate bracket. So how does the electricity get into the domestic grid?
First, the PV module must be connected to the inverter. Therefore, there is a plus cable and a minus cable with a matching MC4 connector on each of the modules. These plugs fit directly into the connectors from the inverter.
The MC4 connector also protects the connections from dust and splash water. Rain and even snow are therefore no problem.
Since the cables on the modules are only very short, the inverter must always be mounted in the immediate vicinity of the modules. As long as you use a separate inverter for each PV module, this is not a problem.
However, modern balcony power plants usually consist of two PV modules that share one inverter with two connections. The length of the connection cables then often no longer allows any play for the alignment of the modules.
It therefore makes sense to extend the DC cables. This is done using suitable photovoltaic extension cables with matching MC4 connectors.
But beware: the length of the cables for safe and effective use is limited.
The required cable cross-section in mm² is calculated as follows for direct current:
A = (2 x length x current) / (conductivity of the cable x voltage drop x voltage)
Voltage (see nameplate module)
Connected load (in watts) or amperage (in amps – see module nameplate)
Voltage drop (usually around 1 to 3 percent – 1.5% is a good average)
Line length
If the inverter is not to be installed several meters away from the PV module, the usual 4mm² connection cables can be used.
There are currently three options for connecting the inverter to the home power grid – note the disclaimer at the end of the article). Available are the connection via Schuko plug, via Wieland plug and the direct wiring.
In contrast to direct wiring, where the 3-wire power cable from the inverter is permanently connected to the phase, neutral and protective conductor from the house mains, the connection of the Schuko plug and Wieland plug is made with one plug.
If required, this could simply be pulled out of the contact box in both cases.
The difference between the Schuko plug and the Wieland plug is the shielding of the live contacts. As I wrote above, the contact pins of the Schuko plug are open.
If the emergency shutdown of the inverter does not work, an electric shock is quite possible.
The Wieland plug shields the contacts both in the junction box and on the plug itself. Accidental contact with the live contacts is therefore very unlikely.
However, in order to use this system, the Wieland box must first be professionally installed and connected to the home power grid. The Schuko plug, on the other hand, can be plugged into any Schuko socket.
The right socket for my balcony power plant
If the balcony power plant is now connected to the domestic power grid, the connection type, i.e. Schuko, Wieland or direct wiring, is only one aspect. A second aspect is that the power cable in the house is also up to the expected power.
As a layman, I would like to express myself as follows:
A normal 1.5 mm² power cable, as it was and is very often installed in households, is designed for 220V continuous operation of 3600W.
Therefore, the safety instructions of the junction boxes always state that the total power of 3600W must not be exceeded.
The cable itself probably still offers reserves of up to 4200W, but many contacts and connectors are not designed for this permanent current flow.
The power line would heat up enormously due to the load and a cable fire could then occur at some weak point.
The power on the power line, i.e. the current that flows, is the sum of all the consumers connected to this power line plus the power on the power line. the feed-in of the balcony power plant.
An example –
Watt = Volt x Ampere (W = V x A)
:The power line, 1.5 mm² is fused with 16A (~3600W). A fan heater is already connected to this power line via a socket in the living room. The fan heater has a power of 3200W. In continuous operation, the power cable would already heat up.
The balcony power plant is now also connected to this power line via an outdoor socket and supplies just under 100W in the morning. The line is now loaded with 3300W. The cable would get even warmer, but without causing damage or a cable fire.
If the power plant now supplies 600W at noon, the power line is already loaded with 3800W. The cable would become very warm and existing contacts and cable clamps may catch fire. However, the circuit breaker would not trip because only 3200W is still drawn through it.
To prevent a cable fire, connect the balcony power station to a suitable power line. Ideally, a separate 2.5 mm² power line from the power plant to the house distribution/fuse can be used for this purpose.
If this power cable is not available or cannot be re-laid, the consumers on the corresponding circuit must be used in such a way that a permanent overload of the power cable can be excluded.
Technically, this could also be solved by replacing the circuit breaker. The 16A automatic control unit secures the power supply of all consumers up to 3600W. However, the output of the balcony power plant would be fed in additionally.
However, if the fused power, including the power plant, is below the 3600W, this would significantly increase safety.
Changing from a 16A circuit breaker to a 13A circuit breaker, would activate the protection from a power consumption of about 3000W. Plus the max. Power of the power plant, the power on the power cable would be limited to 3600W.
In this case, however, the circuit breaker would always trip when the fan heater is in continuous use.
- Misst den Stromverbrauch • Berechnet Energiekosten • Großes Display • Einfache Bedienung
- Stromverbrauchszähler mit digitaler Anzeige • Großes LCD-Display • Maße (B x H x T): 66 x 108 x 75 mm, Gewicht: 120 g
- Viele Messwerte: misst und errechnet Energieverbrauch (0 - 9.999,9 kWh), Wirkleistung (0 - 3.680 Watt), Netzspannung (200 - 276 Volt) und Energiekosten (0 - 99,99 €) • Einfache Bedienung über 2 Tasten
- Berechnet Stromkosten nach individuellen Stromtarif-Angaben (0 - 99,99 €/kWh einstellbar) • Belastbar bis 3.680 Watt (230 Volt / 16 Ampere)
- Energiekostenmesser inklusive deutscher Anleitung. Strommessgerät Steckdose - Außerdem relevant oder passend zu: Einspeisezähler, Strom Stecken, Digitales, Digitale, Aquarium, Energy, messen, Meter
To which phase must the balcony power plant be connected?
Incidentally, it does not matter to which phase of the power grid the new power plant is connected.
As I wrote at the beginning, the generated electricity is consumed directly. Technically, it may well be that the generated electricity is fed into the public grid and the current electricity consumption is drawn from the public grid on another phase.
However, since the electricity meters operate on a net basis, only the difference between feed-in and purchase is counted.
Example:
The household consumption on L1 is 250W and the power plant produces 350W on L2 at the same time. The generated current of 350W is fed into the public grid on L2 while at the same time 250W is drawn on L1. The electricity meter calculates a net consumption of 0W (mathematically, the electricity meter should turn backwards due to the surplus of 100W – which is prohibited in Germany).
Total consumption: 250W Chargeable purchase: 0W Savings: 250W
The household consumption on L1 is 500W and the power plant produces 350W on L2 at the same time. The generated current of 350W is fed into the public grid on L2 while at the same time 500W is drawn on L1. The electricity meter calculates a net consumption of 150W, which would then also have to be paid accordingly.
Total consumption: 500W Chargeable purchase: 150W Savings: 350W
The household consumption on L1 is 250W, on L2 200W and the power plant produces 350W on L2 at the same time. The generated electricity is already used within L2 and the surplus of 150W on L2 is fed into the public grid. At the same time 250W are referred to L1. The electricity meter calculates a net consumption of 100W, which would then also have to be paid accordingly.
Total consumption: 450W Chargeable purchase: 100W Savings: 350W
So, provided that the household electricity consumption is equal to (or higher than) the electricity yield, it is worth considering the installation of a balcony power plant.
Reporting obligation and market master register
Once the balcony power plant is in place and the sun is shining, the power generation can finally start – unless you live in Germany! Here it needs then nevertheless still some applications, notifications and other bureaucracy.
As I write these lines, the following applies (without guarantee):
- The balcony power plant may not exceed the max. Output power of 600W per electricity meter/household connection must not be exceeded. The power of the modules can be significantly higher, the decisive factor is what power the inverter feeds into the grid. As of 01.01.2024, this limit is to be raised to 800W, as is already common in many other EU countries.
- The balcony power plant must be registered with the local energy supplier. For this purpose, the EVU (energy supply companies) usually offer their own forms. However, approval by the RU is not required. So the municipal utilities are not allowed to prohibit the operation.
- The balcony power plant must be registered in the market master register.
- Other frameworks from BMI.
How to connect the microinverter to your private WLAN and how to monitor the power generation with the app you can read here: Balcony Power Plant – Set Up Solarman App | Deye Cloud App
Please note that I write in this post my own experiences and thoughts. When rebuilding, the following applies: Inform yourself about the specifications, guidelines and laws to be observed. In addition, work on electrical systems should always be carried out by competent persons!
Feel free to write constructive feedback in the comments section.
Summary and conclusion
To make my household more energy efficient, I replaced my 300W with a new 800W balcony power station. This upgrade included new PV modules, an updated substructure, a modern micro inverter and a new connection to the house grid.
A balcony power station uses an inverter to convert the direct current from the solar cells into usable 220V alternating current, which is fed directly into the domestic grid.
If there is surplus production, the electricity is fed into the public grid; if there is additional demand, additional electricity is purchased. The aim is to optimize self-consumption of solar power in order to cover the household’s basic electricity consumption.
Installing a balcony power station is surprisingly uncomplicated and quick. The challenge lies in the optimal alignment of the PV modules to the sun in order to maximize the yield and in the secure connection to the power grid.
Efficiency increases are possible through adjusted consumption times, optimized module alignment or the use of a solar tracker.
The assembly includes the PV modules and the micro inverter as well as the cabling and mounting devices. They can be mounted flexibly in various locations, for example on the balcony, the façade or the roof.
A stable and storm-proof installation is important.
There are various methods for connecting to the mains supply, such as the Schuko plug, the Wieland plug or direct cabling.
Each method has its own safety and installation features, and special care must be taken when handling live parts.
Not to be forgotten is the legal obligation in Germany to register such a power plant with the local energy supplier and enter it in the market master register.
- % - Dank unseres Upgradebaren Wechselrichter auf 800W, sparen Sie ab sofort 33% mehr. Profitieren Sie noch heute.
- - Die Power Lsung mit 4x 500W Modulen erzeugt maximale Leistung, um lange und konstant mit 800 einzuspeisen! Die Montage ist einfach, schnell und ohne Fachkenntnisse mglich.
- - Das 2000W onPower Solar Balkonkraftwerk besteht nur aus hochwertigen Bauteilen. 4x Bifaziale 500W Jolywood HD120N Solarmodule, 1x AP Systems EZ1 800W Wechselrichter, 4x 2,0m Verlngerungskabel, 4x Y-Verteiler, 1x 5m Kabel zur Steckdose & 1x Wechselrichterhalterung.
- - Mit der Telefon-App berwachen Sie Wechselrichter-Daten per WLAN-Funktion in Echtzeit. Sie sind direkt informiert ber tgliche & jhrliche Solarertrge & CO-Einsparungen! Dank einfacher Einrichtung und intuitiver Bedienung direkt startklar!
- - Die Bauteile der Stecker Solaranlage versprechen eine lineare Leistung bis zu 30 Jahre nach dem Kauf. Somit sind die Ertrge Ihres Balkonkraftwerks gesichert und bereit fr die Zukunft.
Dieser Beitrag ist auch verfügbar auf:
English 
Deutsch
Ähnliche Beiträge
Balcony power station – Set up the Solarman app optimally
Optimize balcony power plant – New modules and 220V battery storage for maximum efficiency
